We're an authorized dealer and certified installer for all major marine electronics brands. If it goes on a boat, we install it right.
See what's in front of your boat in real time — fish, structure, bottom contour — before you're over it. Forward-facing sonar has revolutionized fishing, and we install and configure it properly so you get the most out of it.
Real-time scanning sonar that shows you live images of fish and structure ahead of, below, or around your boat. The industry benchmark for forward-facing sonar — we install and calibrate for optimal performance on your hull.
Live sonar with forward, down, and scout modes. See fish swimming in real time and watch how they react to your presentation. We handle full transducer installation and MFD integration.
Simrad's CHIRP sonar with FishReveal technology overlays fish arches directly on structure imagery. Combined with Simrad MFD integration, it creates the most detailed underwater picture available.
Proper transducer placement is critical — a poorly mounted transducer degrades performance regardless of the unit above it. We assess your hull, select the correct location, and mount it for clean water flow and maximum signal quality.
Forward-facing sonar is the most installation-sensitive electronics category on a boat. Turbulent water flow from improper transducer placement, interference from nearby through-hulls, or incorrect tilt angle can render even a $2,000 LiveScope system nearly useless.
Our Airmar Certified and NMEA-certified installers assess your hull type, engine configuration, and existing through-hull locations before recommending transducer placement. We mount, cable-route, and configure your system for the best possible real-world performance — then take it on a test run to verify.
See in the dark, navigate safely at night, and monitor your vessel around the clock — we install and integrate all camera systems with your onboard MFD.
A properly designed NMEA 2000 network is what separates a collection of individual devices from a fully integrated marine electronics system — and we're certified to build it right.
NMEA 2000 is the industry-standard communication protocol that allows all your marine electronics to share data over a single network backbone. When properly installed, your chartplotter knows your engine RPM, your autopilot sees wind data, and your MFD displays depth from any sonar on the network.
As NMEA Certified Installers, we design and build your network from scratch — proper backbone sizing, correct termination, T-connector placement, and load calculations to ensure every device communicates reliably without dropouts or interference.
Whether you're adding one device or building a complete helm from the ground up, we ensure your NMEA 2000 network is built to last and easy to expand in the future.
Certification isn't just a credential — it's the difference between an install that performs flawlessly for years and one that causes problems from day one.
Most electronics installations happen alongside other upgrades. We handle the whole project.
Tell us what you want to accomplish on the water and we'll recommend the right equipment and build a plan to get it done right.